Fluoride (F-) Ion Selective Electrode
-
Specifications:
- Sensor Type: Solid State
- Limits (ppm): 1,900 to 0.02
- Concentration Range (molar): 0.1 to 10^-6
- pH Range: 4 to 8
- Main Interferences: OH-
- Standard (Calibration) Solutions: 1000 ppm as F-
- Ionic Strength Adjusting Buffers (ISA): TISAB
- Type of Reference Electrode: Single-Junction (*)
- Filling Solution for Double-Junction Ref. Electrodes: Not applicable
Applications Notes
View all-
STANDARD TEST METHODS FOR FLUORIDE ION IN WATER...
These test methods (A and B) determine fluoride ion levels in water. Method A distills and measures fluoride from 0.1 to 2.6 mg/L. Method B uses an ion-selective electrode, measuring...
STANDARD TEST METHODS FOR FLUORIDE ION IN WATER...
These test methods (A and B) determine fluoride ion levels in water. Method A distills and measures fluoride from 0.1 to 2.6 mg/L. Method B uses an ion-selective electrode, measuring...
-
DETERMINATION OF FLUORIDE IN VEGETATION
Fluoride is extracted from the dried vegetation by stirring with 0.1M perchloric acid and then determined by the standard addition technique. Equipment Required; Corning pH/Ion meter OR pH meter with...
DETERMINATION OF FLUORIDE IN VEGETATION
Fluoride is extracted from the dried vegetation by stirring with 0.1M perchloric acid and then determined by the standard addition technique. Equipment Required; Corning pH/Ion meter OR pH meter with...
-
Analysis of Fluoride in Water
A rapid and simple method for the measurement of fluoride concentration in water in the range of 0.1- 100 ppm. Equipment Required Ion analyzer or pH meter with millivolt scale...
Analysis of Fluoride in Water
A rapid and simple method for the measurement of fluoride concentration in water in the range of 0.1- 100 ppm. Equipment Required Ion analyzer or pH meter with millivolt scale...